REMS Helix VE – drilling, screw driving and deburring.
Powerful,handy power tool for drilling, driving in, loosening screws
and deburring pipes. For cordless and mains operation. For assembly, disassembly, repair. Drilling in steel, stone ≤ Ø 10 mm Drilling in wood ≤ Ø 28 mm Drilling with tile drills, e.g. in ceramic, fine clay, granite, marble ≤ Ø 14 mm Driving in/loosening of screws ≤ Ø 7 mm
Design
Ultra light, ultra small, ultra handy. Drive machine with battery pack weighs only
1.3 kg. Can therefore be used everywhere, free hand, over head, also in very
confi ned spaces. Optimum weight distribution for one-hand operation. Ergonomically
designed housing. Drive machine with keyless quick chuck, clamping range
0.8 – 10 mm, right and left hand rotation. 2 continuously adjustable speed ranges
from 0 to 300 rpm and 0 to 1,250 rpm, 25 torque stages plus drilling stage, high
torque of 31 Nm in the low speed range for powerful screw driving. Integrated LED
work light for illuminating the work place. Belt clip. For cordless and mains operation.
1 bit with double blade slot/cross-head, 50 mm long. Bit set as accessory.
Drive Powerful electro-mechanical drive with powerful battery motor 14.4 V, 300 W output, robust, 2-step, precision, ball bearing-mounted planetary gear, maintenance-free. Safety switch.
Vario-Electronic Continuous electronic speed control for gentle start drilling, driving in/loosening of screws and selection of the speed suitable for the material when drilling and driving in/loosening screws. The speed can be continuously controlled by variable pressure on the safety switch from 0 to 300 or 0 to 1,250 rpm (accelerator switch).
Battery or mains operation Li-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 1.5 or 3.0 Ah capacity for long service life. Powerful and light. Li-Ion 14.4 V, 3.0 Ah battery for driving in more than 1,000 screws 4 x 40 mm in wood. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range – 10 to + 60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V/14.4 V voltage supply for mains operation 230 V instead of Li-Ion 14.4 V battery, as accessory.
REMS Helix VE – drilling, screw driving and deburring.
Powerful,handy power tool for drilling, driving in, loosening screws
and deburring pipes. For cordless and mains operation. For assembly, disassembly, repair.
Drilling in steel, stone ≤ Ø 10 mm
Drilling in wood ≤ Ø 28 mm
Drilling with tile drills, e.g. in ceramic, fine clay, granite, marble ≤ Ø 14 mm
Driving in/loosening of screws ≤ Ø 7 mm
Design
Ultra light, ultra small, ultra handy. Drive machine with battery pack weighs only
1.3 kg. Can therefore be used everywhere, free hand, over head, also in very
confi ned spaces. Optimum weight distribution for one-hand operation. Ergonomically
designed housing. Drive machine with keyless quick chuck, clamping range
0.8 – 10 mm, right and left hand rotation. 2 continuously adjustable speed ranges
from 0 to 300 rpm and 0 to 1,250 rpm, 25 torque stages plus drilling stage, high
torque of 31 Nm in the low speed range for powerful screw driving. Integrated LED
work light for illuminating the work place. Belt clip. For cordless and mains operation.
1 bit with double blade slot/cross-head, 50 mm long. Bit set as accessory.
Drive
Powerful electro-mechanical drive with powerful battery motor 14.4 V, 300 W
output, robust, 2-step, precision, ball bearing-mounted planetary gear,
maintenance-free. Safety switch.
Vario-Electronic
Continuous electronic speed control for gentle start drilling, driving in/loosening
of screws and selection of the speed suitable for the material when drilling and
driving in/loosening screws. The speed can be continuously controlled by variable
pressure on the safety switch from 0 to 300 or 0 to 1,250 rpm (accelerator switch).
Battery or mains operation
Li-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 1.5 or 3.0 Ah
capacity for long service life. Powerful and light. Li-Ion 14.4 V, 3.0 Ah battery
for driving in more than 1,000 screws 4 x 40 mm in wood. Total discharge and
overload protection with single cell monitoring. Temperature monitoring during
the charging process. Operating temperature range – 10 to + 60 °C. No memory
effect for maximum battery power. Rapid charger for short charging times.
Li-Ion 230 V/14.4 V voltage supply for mains operation 230 V instead of Li-Ion
14.4 V battery, as accessory.