Logout

RM560020

RM560020

RM560020 - REMS Tiger ANC

Electric Reciprocating Pipe Saw

REMS Tiger ANC

Only 3.0 kg. Ideal for assembly, dismantling, repair.
Ideal for steel pipes and others.

Powerful, robust, handy power tool with force-transmitting guide holder for effortless, fast,
right-angled sawing everywhere on site, without a vice. Also for universal free-hand sawing.


Many materials, e.g. wood, wood with nails, pallets, metal, even stainless steel, cast iron,
breeze blocks, plaster boards, pumice stone, brick For materials that are difficult to cut,
e.g. stainless steel pipes, hard cast iron, use the REMS Tiger ANC SR with electronic
stroke speed control.


REMS Tiger ANC Set 
Electric reciprocating pipe saw for effortless, fast, right angle sawing with guide support
and for free-hand sawing. Drive unit with straight machine handle, maintenance-free,
water and dust resistant oscillating drive with allround needle bearing mounted crank
drive (ANC), aggressive orbital action, powerful universal motor 230 V or 110 V,
50 – 60 Hz, 1050 W, safety tip switch. Fixed stroke 2,400 rpm. Overload protection.
Universal saw blade clamp. Hexagon key. Guide support 2". 2 pcs.
REMS special saw blades 2"/140-3,2. In sturdy steel case.

Power-transferring guide support
400% additional sawing force for effortless, super fast sawing, e.g. 2" steel pipe in only 8s.
For assembly and dismantling. Guide support with five-fold force transmitting leverage
allows effortless, fast, right angled sawing anywhere on site, without a vice.
Ideal handling, easy and rapid to operate, positioned with one hand only for chucking
and sawing. No loose swinging chain and cumbersome handling as with chain vice.
No danger of jamming by limitation of swing angle.
For optimum in-feed with guide support a straight machine handle is advantageous.

Right angle sawing
Right angle cut with guide support and REMS special saw blade.
Essential for subsequent operations in pipe installation.
REMS special saw blade extra thick, rigid and unbendable, double tang, absolutely
essential for right-angled sawing and fast disassembly of steel pipes with force-transmitting
guide holder. Only 1 REMS universal saw blade for all sawing work instead of many
different saw blades. Double tang for free-hand sawing and sawing with guide holder.

REMS saw blades
Full range of REMS saw blades for free-hand sawing of different materials.

Universal saw blade clamp
All saw blades – with universal or double tang – can be clamped without changing or
turning the saw blade thrust piece.

Design
Robust, job site-proven. Super light, only 3.0 kg. Can be used anywhere.
Ergonomically shaped front housing grip with slip resistant protection cover for forceful
feed forward during free-hand sawing. Choice of practical D-shaped handle, (free-hand sawing),
or straight machine handle, (sawing with guide support). Swivel support shoe for safe guiding
of the saw on the material to be sawn. High sliding silicone gasket protects gear against
water and dust. Powerful universal motor with ample reserve capacity, 1050 W respectively
1400 W (REMS Tiger ANC SR). Safety tip switch. Choice of drive unit with fixed, ideal speed,
electronic speed control (Vario-Electronic) or electronic speed regulation. Overload protection
(REMS Tiger ANC) protects motor, gear and saw blade. The electronic tachometer speed
controller (REMS Tiger ANC SR) used for control keeps the preselected number of strokes
constant even under load and includes tachogenerator, electronic control, start-up current
limiter for soft start-up, overheating protection by temperature monitoring of the field winding
of the motor with PTC resistance (Positive Temperature Coefficient) and blocking protection
for gearbox and motor.

Sturdy, square lift rod
In special solid steel, mounted precisely in
needle bearings towards the force direction and along the complete stroke length,
for distortion-free, precise cutting also during tough use. For extremely long service life.
Drive rod runs in an enclosed housing for safe work.

Oscillating drive with ANC
Super stable, water and dust resistant, maintenance-free oscillating drive for simultaneous
generation of sawing stroke and orbital action of lift rod and saw blade. Allround needle
bearing mounted crank drive (ANC) reduces friction, heat generation, wear.
For long service life of drive also at extreme sawing.

Aggressive orbital action
Vertical hacking motion of saw blade provides forceful, fast forward feed, excellent chip flow
and long service life of saw blades. Fixed orbital action, running in needle bearings, ensures
long-lasting and forceful sawing also during extreme load conditions, e.g. sawing of steel pipe.
Adjustable mechanisms with a great variety of parts and a reduced system stability do not
withstand the high feed forward pressure and the heavy-duty requirements of forceful cutting
of steel pipes, particularly when a guide support with leverage is being used.

Ideal speed
Deliberately fixed speed. Therefore optimum cutting speed for maximum
protection of motor and gear and maximum service life of saw blades. The ideal cutting speed
of 2,400 rpm has been determined by extensive sawing tests with steel pipe which lead to
optimum performance in combination with the aggressive, fixed orbital action, guide support
and REMS special saw blade.

RM560020 Tiger -733
 

RM560020 - REMS Tiger ANC
larger imageMove mouse over the image to magnify
$924.00
Qty.

You might also be interested in ...

RM560022 - REMS Tiger ANC Pneumatic
$3,823.30 $2,229.80 Save $1,593.50 incl GST